BASIC OPERATION
3.7 Audio Backup and Playback
The DVR only has several channels that support audio backup. If you want to backup images with audio, please
connect the cameras to the correct channels. For detailed camera connection, please refer to section “3.2 Camera
Connection” in the manual. For 16CH and 8CH model, the audio channels are CH1 – CH4. For 4CH model, the audio
channels are CH1 – CH2. For detailed backup instruction, please refer to the manual.
To select live or playback sounds of the audio channels, please press these two buttons “ ” on the DVR
front panel at the same time. For detailed playback instructions, please refer to section “3.3 Playback” at page 9. For
detailed playback instructions on the remote side, please refer to the manual.
3.8 PTZ Camera Control
Please connect the PTZ camera with the DVR and setup the required camera settings first. For the PTZ camera
connection, please refer to section “3.2.2 PTZ Camera Connection” in the manual, or refer to section “3.3.3 Connect
PTZ Camera and DVR with Keyboard Controller” in the manual. For the PTZ camera ID, protocol, baud rate setting (at
the DVR menu), please refer to section “7.1.7 Remote” in the manual.
1) PTZ control at DVR side:
Press the two buttons “ ” on the DVR front panel at the same time to enter / exit the PTZ control mode.
In the PTZ control mode:
Zoom in: Press "＋" button ; Zoom out: Press "－" button
Adjust PTZ angle: Press "UP”, “DOWN”, “LEFT” or “RIGHT" buttons
2) PTZ control at keyboard controller side:
Press this key to enter the PTZ camera control mode. In the control mode of the PTZ
camera, the LED light of the PTZ camera icon on the controller will be on.
KEYS OPERATION
Press this key to access the main menu of the PTZ camera.
Use the up or down key to position the cursor beside the selection / make selection.
Press the right key, the sub-menu shows up.
Press the left key, go the upper layer of the menu list.
Use the enter key to confirm the setting / Enter the sub-menu
FUN.1
Press this key to configure the setting of the PTZ camera on the controller LCD display.
In the setting menu, use the navigation keys to select and modify the setting.
SET.
This key is saved for future functions.
SEQ.
Press this key to start sequence function. Press it again to exit the sequence mode.
GOTO
Press this key to go to the preset point
－ FOCUS ＋
Adjust the focus of the PTZ camera.
/
Press these keys to zoom out / zoom in the PTZ camera.
TRACK
Press this key to start auto-tracking function and press it again to exit.
STOP
NA
－ / ＋
NA
0 ~ 9
Use this number pad to enter the camera ID, channel number and password, etc.
ESC
Ignore the setting and exit.
Confirm the setting
Use the joystick to control the PTZ camera to move up / down / left / right.
Turn the joystick clockwise to zoom in. Turn the joystick counter-clockwise to zoom out.
(60 páginas)
(76 páginas)
(48 páginas)
(212 páginas)
(73 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais