MPEG LA 8CH Manual do Utilizador descarregar pdf (Página 10)

CONNECTION AND SETUP

3.3. Optional Peripheral Connection (Selected models only)

Depending on the DVR model you have, this DVR series may support to connect other peripherals. For detailed

connection, please refer to their own user manuals.

3.4. Power Setup

This device should be operated only with the type of power source indicated on the manufacturer’s label. Connect

the indicated AC power cord to the power adapter, and plug into an electrical outlet. The power LED will be on.

Note: To ensure that your DVR works constantly and properly, it's recommended to use an UPS,

Uninterruptible Power Supply (Optional), for continuously operation.

3.5. Date and Time Setting

Before operating your DVR, please set the date and time on your DVR first.

Press “MENU” and enter the password to go to the menu list. The default admin password is 0000. Move to

“DATE” and you can set the date / time / daylight saving in the “DATE” menu list.

Note: Please DO NOT change the date or time of your DVR after the recording function is activated.

Otherwise, the recorded data will be disordered and you will not be able to find the recorded file to

backup by time search. If users change the date or time accidentally when the recording function

is activated, it’s recommended to clear all HDD data, and start recording again.

Note: For the first time to use the DVR, please charge the DVR for at least 48 hours continuously after the

date & time is set correctly.

3.6. Password Setting

Press “MENU” and enter the password to go to the menu list. Then, move to “ADVANCE” to enter the advanced

setting menu.

In the “ADVANCE” menu, move to “SYSTEM INFO”. Select “PASSWORD” and press “ENTER” to enter the

submenu to set the password (four digits). The default admin password is 0000.

3.7. Record Setting

By defaults, the record function is activated when the DVR is powered on and a camera is connected.

To change the record settings, press “MENU” and enter the password to go to the menu list. Then, move to

“ADVANCE”  “RECORD” to enter the advanced setting menu. You can set the image size, image quality and the

image per second for recording.

For details, please refer to “5.2. RECORD” at page 11.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 44 45

Sem comentários

MPEG LA 8CH Manual do Utilizador Página 10